Publicaciones

Publicaciones

Jaramillo, J., Zarzycki, A., Galeano, J., & Sandoz, P. (2017). Performance Characterization of an xy-Stage Applied to Micrometric Laser Direct Writing Lithography. Sensors, 17(2), 278.

Bedoya, C., Cardona, A., Galeano, J., Cortés-Mancera, F., Sandoz, P., & Zarzycki, A. (2017). Accurate Region-of-Interest Recovery Improves the Measurement of the Cell Migration Rate in the In Vitro Wound Healing Assay. SLAS TECHNOLOGY: Translating Life Sciences Innovation, 2472630317717436.

Cardona, A., Ariza-Jiménez, L., Uribe, D., Arroyave, J. C., Galeano, J., & Cortés-Mancera, F. M. (2017). Bio-EdIP: An automatic approach for in vitro cell confluence images quantification. Computer Methods and Programs in Biomedicine, 145, 23-33.

Galeano, J. A., Sandoz, P., Zarzycki, A., Robert, L., & Ocampo, J. M. J. (2017). Microfabrication of position reference patterns onto glass microscope slides for high-accurate analysis of dynamic cellular events. TecnoLógicas, 20(39).

Sandoz, P., Galeano, J. A., Zarzycki, A., Monsalve, D. J. B., Mancera, F. C., Echeverry, A. C., & Robert, L. (2017). Visual in-plane positioning of a Labeled target with subpixel Resolution: basics and application. TecnoLógicas, 20(39).

Restrepo-Agudelo, S., Roldan-Vasco, S., Ramirez-Arbelaez, L., Cadavid-Arboleda, S., Perez-Giraldo, E., & Orozco-Duque, A. (2017). Improving surface EMG burst detection in infrahyoid muscles during swallowing using digital filters and discrete wavelet analysis. Journal of Electromyography and Kinesiology, 35, 1-8.

Cadavid-Arboleda, S., Ramirez-Arbelaez, L. M., Perez-Giraldo, E., Restrepo-Agudelo, S., Roldan-Vasco, S., Suarez-Escudero, J. C., … & Orozco-Duque, A. (2017). Assessment of Surface Electromyography During Orofacial Praxis in Healthy Subjects. In VII Latin American Congress on Biomedical Engineering CLAIB 2016, Bucaramanga, Santander, Colombia, October 26th-28th, 2016 (pp. 165-168). Springer, Singapore.

Valderrama-Hincapié, S. E., Hernández, A. M., Sánchez, F., Roldán-Vasco, S., López-Ríos, A. L., & Hutchison, W. D. (2017). Optimization of spectral analysis of electrophysiological recordings of the subthalamic nucleus in Parkinson’s disease: A retrospective study. In VII Latin American Congress on Biomedical Engineering CLAIB 2016, Bucaramanga, Santander, Colombia, October 26th-28th, 2016 (pp. 300-303). Springer, Singapore.

Cantillo-Mackenzie, G., Martinez-Moreno, L., Bedoya-Londoño, C. L., Perez-Giraldo, E., Ramirez-Arbelaez, L. M., Cadavid-Arboleda, S., … & Suarez-Escudero, J. C. (2017). Surface Electromyographic Characterization of Five Orofacial Ideomotor Praxis in 20 Healthy Individuals. In VII Latin American Congress on Biomedical Engineering CLAIB 2016, Bucaramanga, Santander, Colombia, October 26th-28th, 2016 (pp. 221-224). Springer, Singapore.

Pedro Nel Alvarado Torres, Luis Fernando Cardona Sepulveda, Alexander Santamaria Palacio, Andres Amell Arrieta, Wilson Ruiz Machado, “Characterization of Coal Combustion in a Hot and Diluted Environment Using a Surface-Stabilized Gas Natural Flame” .Energy and fuels, 2017,  ISSN: 1520-5029, p.4479 – 4487

Jennifer Laverde Munera, Pedro Nel Alvarado Torres, Wilson Ruiz Machado, “Efecto del contenido de oxígeno y metano en la cinética de oxidación de un carbonizado de carbón”, Revista De La Academia Colombiana De Ciencias Exactas, Físicas Y Naturales, 2017  ISSN: 0370-3908, v.41 p.221 – 229

Luis Fernando Grisales Noreña, Bonie Johana Restrepo Cuestas, Fredy Esteban Jaramillo Ramírez (2017).’Ubicación y dimensionamiento de generación distribuida: Una revisión’. Ciencia e Ingeniería Neogranadina (Colombia) ISSN 0124-8170, vol 27 num 2, pp 151-176

Daniel González Montoya, Carlos. A. Ramos Paja, Freddy Bolaños Martínez, Fabio Ramírez Quiroz, Juan R. Camarillo Peñaranda, Adriana Trejos Grisales (2017). “Reconfiguration of photovoltaic panels for reducing the hydrogen consumption in fuel cells of hybrid systems”. Tecnologicas ISSN 0123-7799, vol20 num39, pp. 896-910

Bonie Restrepo, Adriana Trejos (2017). “Bypass Diode Characterization in Photovoltaic Systems”. VIII Congreso Internacional de Ingenierias Mecánica y Mecatrónica y VI de Materiales, Energía y Medio Ambiente ISSN 2344-7311, Medellín.

Karen Cacua, Robison Buitrago-Sierra, Bernardo Herrera, Farid Chejne, Elizabeth Pabón. Influence of different parameters and their coupled effects on the stability of alumina nanofluids by a fractional factorial design approach. Advanced Powder Technology. Available online 26 July 2017

Hernández-Montes, V., Betancur-Henao, C. P., & Santa-Marín, J. F. (2017). Titanium dioxide coatings on magnesium alloys for biomaterials: A review. Dyna, 84(200).

Cadena Ch, E. M., Vélez R, J. M., Santa, J. F., & Otálvaro G, V. (2017). Natural Fibers from Plantain Pseudostem (Musa Paradisiaca) for Use in Fiber-Reinforced Composites. Journal of Natural Fibers, 1-13.

Maya-Johnson, S., Santa, J. F., & Toro, A. (2017). Dry and lubricated wear of rail steel under rolling contact fatigue-Wear mechanisms and crack growth. Wear, 380, 240-250.

Vargas, C. A., Sierra, J. D., Posada, J. C., Garcia, L. A., & Zapata, L. J. (2017). Reinforcement effect of carbon black in Colombian natural rubber: Benchmarking with Guatemala rubber. Journal of Elastomers & Plastics, 49(3), 265-278.

PUBLICACIONES 2016

Maria Elena Moncada Acevedo, Sebastián Roldan Vasco, Carlos Andrés Vargas Isaza, Jenniffer Zapata Giraldo, Mónica Liliana Mejia Suaza 2016. ‘Ingeniería de Tejidos y Aplicaciones’, Fondo Editorial ITM (Colombia) ISBN: 978-958-8743-84-4.

July Galeano Zea, Cesar Bedoya, Andrés Cardona, Fabián Cortés-Mancera, Patrick Sandoz, and Artur Zarzycki 2016. Modified position-referenced microscopy for the analysis of low-magnification biological events: a case of study in the wound healing assay with a human hepatoma cell line’, Latin America Optics and Photonics Conference, pp. LTu4A-52. Optical Society of America (Estados Unidos) ISBN: 978-1-943580-16-3.

Bonie Johana Restrepo Cuestas, Héber López 2016. ‘Caracterización de luminarias tipo haluro metálico ante eventos SAG‘, Revista EIA (Colombia) ISSN 1794-1237, vol 13 num 26, pp. 75-82.

Carlos Andrés Ramos-Paja, Luz Adriana Trejos, and Javier Herrera Murcia 2016. ‘Fast calculation of the maximum power point of photovoltaic generators under partial shading’, revista Ingeniería e Investigación (Colombia) ISSN 0120-5609, vol 36 num 3, pp. 58-65.

Luz Adriana Trejos Grisales, Carlos Andrés Ramos-Paja, Andrés Julián Saavedra-Montes 2016. Techniques for modeling photovoltaic systems under partial shading’, Tecnura (Colombia) ISSN 0123-921X, vol 20 num 48, pp. 171-183

Karen Cacua, Luis Olmos-Villalba, Bernardo Herrera, Anderson Gallego 2016. ‘Experimental evaluation of a diesel-biogas dual fuel engine operated on micro-trigeneration system for power, drying and cooling’, Applied thermal engineering (Reino Unido) ISSN: 1359-4311 vol 100, pp. 762-767.

Yuliana Cadavid, Edith M. Cadena, Juan M. Velez, and Juan F. Santa 2016. ‘Degradation of Dyes Using Plantain Fibers Modified with Nanoparticles’, In Natural Fibres: Advances in Science and Technology Towards Industrial Applications, Springer (Netherlands) ISSN 2211-0844, pp. 99-111.

Yuliana Cadavid, Juan F. Santa, and Edith M. Cadena 2016. ‘Película plateada de café: caracterización físico-química y acercamiento a materiales compuestos’, Agronomía Colombiana (Colombia) ISSN 2357-3732, 34(1Supl), S96-S99.

Juan F. Santa, Juan David Vanegas-Jaramillo, and Patiño, I. D. 2016. Mechanical Characterization of Composites Manufactured by RTM Process: Effect of Fiber Content, Strain Rate and Orientation’, Latin American Journal of Solids and Structures (Brasil) ISSN 1679-7825, 13(2), 344-364.

Juan F. Santa, A. Toro, and R. Lewis 2016. ‘Correlations between rail wear rates and operating conditions in a commercial railroad’, Tribology International (Peru) ISSN: 0301-679X ed:v.95 fasc.N/A p.5 – 12

Juan F. Santa-Marín, and A. Toro-Betancur 2016. ‘Microestructura y resistencia adhesivo-cohesiva de recubrimientos de níquel, carburo de tungsteno y óxido de cromo aplicados por aspersión térmica’, Tecno Lógicas (Colombia) ISSN: 0123- 7799 19(36), pp. 27-40.

Natalia Jaramillo, David Hoyos, and Juan F. Santa (2016). ‘Composites with pineapple-leaf fibers manufactured by layered compression molding’, Ingeniería y competitividad (Colombia) ISSN: 0123-3033 18, no. 2 pp. 151-162.

Betancur Henao, Claudia Patricia, Vanessa Hernández Montes, and Robison Buitrago Sierra 2016. ‘Nanopartículas para materiales antibacterianos y aplicaciones del dióxido de titanio’, Revista Cubana de Investigaciones Biomédicas (Cuba) ISSN 1561-3011 35, no. 4 (2016) pp. 366-381.

Juan Carlos Posada, Juan Diego Sierra, and Carlos Andrés Vargas 2016. ‘Predicción de esfuerzos residuales en procesamiento de polímeros por técnicas de superficies de respuesta y simulación’, Actas de Ingeniería (Colombia) ISSN: 2463-0128 2, 16-24.

A. Zuluaga-Velez, R. Buitrago-Sierra, J. F. Santa, F. A. Tabares-Villa, E. Aguilar, and J. C. Sepúlveda-Arias 2016. ‘Synthesis and characterization of nanofibroin hydrogels from Colombian silkworm Bombyx Mori L’, In VII Latin American Congress on Biomedical Engineering CLAIB, Springer (Singapore) ISBN 978-981-10-4085-6 pp. 732-736

Edwar Andres Torres Lopez 2015. ‘Desafíos para la implementación de instrumentación para ensayos in situ de deformación a alta temperatura en el microscopio electrónico de barrido’, Revista Latinoamericana De Metalurgia Y Materiales (Venezuela) ISSN: 0255-6952, vol.35, no. 1, pp. 3 – 14

July Andrea Galeano Zea, Sandra Milena Perez Buitrago, Yonatan Andres Montoya Mejia, Deivid Johan Botina Monsalve, Johnson Garzon Reyes 2015. ‘Blind source separation of ex-vivo aorta tissue multispectral images’, Biomedical Optics Express (Estados Unidos) ISSN: 2156-7085, vol.6, no. 5, pp. 1589 – 1598

Juan Felipe Santa Marin 2015. ‘Tribología: pasado, presente y futuro’, Tecno Lógicas (Colombia) ISSN: 0123-7799, vol. 18, pp. 9 – 10

Juan Gonzalo Ardila Marin, Julio Alberto Casas Monroy, Diego Andres Hincapie Zuluaga 2015. ‘Comparison and validation of turbulence models on numerical study of heat exchangers’, Tecciencia (Colombia) ISSN: 1909-3667, no. 19, pp. 49 – 60

Edwar Andres Torres Lopez 2015. ‘Caracterizacao microestrutural de acosbaixo carbono por microscopia de forca atômica’, Revista Latinoamericana De Metalurgia Y Materiales (Venezuela) ISSN: 0255-6952, vol. 35, no. 1, pp. 118 – 133

Viviana Maria Ospina Guarin, Robison Buitrago Sierra, Diana Lopez 2015. ‘HDO of guaiacol over NiMo catalyst supported on activated carbon derived from castor de-oiled cake’, Ingeniería E Investigación (Colombia) ISSN: 0120-5609, vol.35, no. 2, pp. 49 – 55

Laura Pastor Perez, Robison Buitrago Sierra, Antonio Sepulveda 2015. Bimetallic PtSn/C catalysts obtained via SOMC/M for glycerol steam reforming’, Journal Of Colloid And Interface Science (Suecia) ISSN: 0021-9797, vol. 459, pp. 160 – 166

Juan Felipe Santa Marin 2015. Effect of the Number of Welding Repairs with GTAW on the Mechanical Behavior of AA7020 Aluminum Alloy Welded Joints’, Metallurgical And Materials Transactions B-Process Metallurgy And Materials Processing Science (Estados Unidos) ISSN: 1073-5615, vol.46, pp. 2332 – 2339

Deivid Johan Botina Monsalve, July Andrea Galeano Zea, Sandra Milena Perez Buitrago, Johnson Garzon Reyes 2015. ‘Adquisición y procesamiento de imágenes multiespectrales biológicas: Un caso de estudio en tejido cardiovascular’, Revista De Investigaciones Universidad Del Quindio (Colombia) ISSN: 1794-631X, vol. 27, pp. 61 – 66

Leyla Yamile Jaramillo Zapata, Juan Carlos Posada Correa, Luis Alberto Garcia 2015. ‘Bio-based composites from agricultural wastes: Polylactic acid and bamboo Guadua angustifolia’, Journal Of Composite Materials (Estados Unidos) ISSN: 0021-9983, vol. 1, pp. 1 – 9

Bernardo Argemiro Herrera Munera, Karen Paola Cacua Madero, Luis Carlos Olmos Villalba (2015). ‘Combustion stability and thermal efficiency in a porous media burner for LPG cooking in the food industry using Al2O3 particles coming from grinding wastes’, Applied Thermal Engineering (Reino Unido) ISSN: 1359-4311, vol. 91, pp. 1127 – 1133